FAPlite

OBD2 diagnostic for Peugeot/Citroen vehicles with ELM327 adapters.

- Only for Peugeot and Citroen vehicles

- Please note that this application will not work with bad ELM327 clone adapters which doesn't support extended protocol commands

- Supported INJ ECUs: EDC15C2, EDC17C10, EDC17C10_BR2, DCM3.5, DCM3.5_BR2, HDI_SID803, EDC16CP39, DCM3.4, HDI_SID807_BR2, MED17.4.2, MM6LPB, MEV17.4_EURO4, DCM3.4P, HDI_SID807, MEV17.4_EURO5, MEV17.4.2, ME745, MED17_4_EURO5, SID201, DCM35_HY, J34P, MM6LP, ME749, MM6KP, EDC17CP42, EDC17CP11, MED17_4_EURO4, V46, DCM6.2, ME747, DCN2, V34.1, V46.21, EDC17C60, MED17.4.4, S2000PM2, MEVD17.4.4, VD46, V34.4, S2000P, SID801, ME7.4.4, ME749_EC5, M7.4.4, V46_6, V46_52, V34.3, DCM71v5, MD1CS003

- Supported gearbox ECUS: CFC300P, CFC300P_HY, AM6/AT6, AL6, BVMP_MA, AXN8

- Supported electric power steering ECUS: GEP, DAE_BVH2, DAE_A515, DAEv4, DAEv1

- ELM327 Bluetooth or WiFi adapter required

- Read real time information from your Engine Management ECU

- All sensors displayed like in DiagBox/Lexia manufacturer diagnostic (FAPlite version supports less parameters)

- Now you can check condition of used car before buying

- Faults reading and clearing

- Fast logging of sensors data and displaying in chart or table

- Testing of actioners like engine fan (in full version you get many more: EGR, fuel pump, air mixer, injectors...)

- Customizable display of sensors data

- Check condition of DPF/FAP and additive level

What's New in the Latest Version 1.62

Last updated on Aug 8, 2021 v1.62
- detection of many new ECU software versions for all supported ECU models

v1.61
- support for AXN8 gearbox ECU
- detection of many new ECU software versions for all supported ECU models

v1.60
- support for MD1CS003 ECU
- detection of many new ECU software versions for all supported ECU models


Please NOTE: if you use ELM327 clone adapter, check if it supports extended CAN protocol commands, else it will not work with this software.